Contact Report Details | TEST Data Online | Oregon Drinking Water Services

More information for this water system: SDWIS ID 2184
System Info :: Report for Lenders :: Alerts :: Violations :: Compliance & Enforcement :: Contacts & Advisories :: Site Visits :: Public Notice
Coliform Summary :: Coliform Results :: Coliform Schedules :: LT2 :: GW/GWUDI Source Details :: Plan Review :: Annual Fee
Chemical Summary :: Chemical Results :: Chemical Schedules :: Chemical Schedule Summary :: Arsenic RAA :: Cyanotoxins :: PFAS
Lead & Copper :: DBP Sample Sites :: FANLs :: MRDL :: GWR 4-Log :: Turbidity :: SWTR :: LRAA

Corrosion Control has moved to the Lead & Copper page.

Information for all water systems:
Water System Inventory :: Water System Surveys :: Outstanding Performers :: Treatment Plant Inspections :: Treatment :: Plan Reviews
Alerts :: Violations :: Compliance & Enforcement :: Deficiencies :: System Scores :: Exceedances :: Public Notices :: Service Lines
Water Advisories :: Contact Reports :: Cyanotoxins :: PFAS :: Post-wildfire VOCs :: Fluoride :: Certification List

OHA Drinking Water Services Contact Report Details
PWS ID:	OR41 91611
PWS Name:	GLENWOODS FOOD MART

Who Was Contacted and Phone:	Gerry/Derick Clark (503) 359-5964
Contact Date:	12/09/2013
Contacted By:	WIDDICOMBE, KENT (DEPT OF AGRICULTURE)
Contact Method/Location:	Office

Assistance Type:	OTHER REGULATORY - REGULATORY ASSISTANCE
Reasons:	N/A N/A

Details:	SUMMARY: Visit to the store DETAILS: The system continues on a boil water notice. I talked with James Nusrala and the system is required to 1) fill the 900 gallon tank, 2) Add 16 cups of 8.25% sodium hypochorite. 3) If possible go to spring box and measure 2 cups of chlorine into spring box 3) Run water through taps till 50ppm or strong odor, 4) Hold for 6 hrs, 5) flush system till tests at 0ppm, 6) Take 3 repeat samples for coliform with chlorine residual tests, 7) Reset residual chlorination treatment test for residual for 2ppm 8) Negative tests for coliform with chlorination, back on quarterly testing and chlorine residual tests. ACTION NEEDED: Derick stated the tank would be filled, treated, held, flushed and 3 samples taken at 0ppm chlorine. Then dosing pump to be installed, set and turned on based on James recommendations.